2010 Chrysler Town & Country
Mileage
143,406
Service Date
3/28/2024
Services Performed
- Check Diagnostic Trouble Codes. Found Code P0302 "Cylinder 2 Misfire Detected" And Engine Actively Misfiring. Inspect Cylinder 2 Spark Plug Wire, Spark Plug And Ignition Coil Operation. Found A New Spark Plug Had Been Installed But Is Fuel Soaked. Test Ignition Coil And Found Very Low Output For Cylinder 2. Will Require Full Tune Up And Compression Test To Confirm Internal Engine Heath To Start. Customer Stated They Replaced Spark Plug And Cleared ECM Memory, May Have Other Hidden Issues.
- Preform Engine Compression Test. All Cylinders 185-190 PSI At This Time. (specification "not less than 100psi or a 25% difference between cylinders" )
- Replace Spark Plugs Ignition Coil And Ignition Cables. Clear Diagnostic Trouble Codes And Road Test As Needed. No Codes Present At This Time. CHECK ENGINE LIGHT MAY COME BACK ON DUE TO LARGE EXHAUST LEAK.
- Changed Motor Oil & Replaced Filter, Added 5 QTS Synthetic Blend Motor Oil, Lube Chassis, Check all Fluid Levels
- Removal Of Waste Oil
Mary T. gave our service a 5 star review on 3/28/2024
